Type 6080 - Direct-acting 2/2-way plunger valve up to 900 bar

Type beskrivelse

The valve type 6080 is a direct-acting plunger valve for hydrogen applications. The plunger guiding tube and stopper are screwed together to increase the pressure resistance in contact with hydrogen. Certified 3.1 materials suitable for hydrogen and carbon-coated magnetic steels are used. Each valve is subject to a functional test at maximum nominal pressure. The external leakage at nominal pressure is 5x 10-5 mbar l/s. On request, the push-over coil can be provided as a Zone 1 or Category 2 explosion-proof version.

Hydrogen-resistant screwed fluid housing
Function test with forming gas at nominal pressure
Explosion-proof design ATEX and IECEx
Inspection holes for monitoring the process seal
Normally Open (NO) versions on request

For å velge korrekt produkt, vennligst se tekniske data, bilder og notater, for korrekt bruk i henhold til databladet.

Applikasjoner og verktøy

Nedlastinger

Datablader

	Beskrivelse	Filstørrelse	Språk / land
	Data sheet Type 6080 \| Direct-acting 2/2-way plunger valve up to 900 bar	598,2 kB	EN / EU
	Datenblatt Typ 6080 \| Direktwirkendes 2/2-Wege Hubankerventil bis 900 bar	599,7 kB	DE / DE

Brukerhåndbøker

Beskrivelse	Filstørrelse	Språk / land
Operating Instructions Type 6080 \| 2/2-way solenoid valve	354,4 kB	EN / EU
Bedienungsanleitung Typ 6080 \| 2/2-Wege Magnetventil	360,7 kB	DE / DE
Manuel d'utilisation Type 6080 \| Électrovanne 2/2 voies	345,7 kB	FR / FR

Deklarasjon

	Beskrivelse	Filstørrelse	Språk / land
	EU-DoC\|EU Declaration DGRL, ROHS, MRL	39 kB	EN,FR,DE