Pneumatisk styrt 2-veis reguleringsventil ELEMENT
Type 2301 / Artikkelnr. 466160
Artikkelbeskrivelse
I henhold til Bürkerts filosofi oppfyller konstruksjonen til reguleringsventil type 2301 alle relevante krav, også under vanskelige forhold. Lang levetid og tetthet oppnås med den velprøvde selvjusterende spindelpakningen med utbyttbare V-pakninger. Hvert ventilhus kan utstyres med opptil 5 forskjellige ventilsetestørrelser. Disse ventilsetekombinasjonene gir en pålitelig og repeterbar karakteristikk av endringen i gjennomstrømningen. Reguleringskjeglene kan leveres enten i rustfritt stål, PTFE-pakning eller en PEEK pakning for tett lukking i henhold til lekkasjeklasse III, IV eller VI. Designet muliggjør enkel integrering av moduler, enten de er en elektropneumatisk posistioner eller en regulator. Systemet har ett kompakt og glatt design, integrerte styreluftkanaler, beskyttelsesart IP65/67 og overlegen kjemisk motstandsdyktighet.
- Handelsvare-koder
- 84818073
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
---|---|---|
Type | 2301 | |
Product sub-group | Process control valves | |
Actuator version | ELEMENT | |
Main valve operating principle | Globe valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 16 | bar |
Control pressure min | 5,5 | bar |
Control pressure max | 7 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 185 | °C |
Kv value (water) | 0,1 | m3/h |
Nominal pressure (DIN EN 1333) | PN 25 | |
Nominal Pressure (DIN EN 1759) | Class 150 | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Metals | |
Seat seal material | stainless steel | |
Orifice | 3 | mm |
Body nominal size | 15 | mm |
Body nominal size (IN) | 1/2 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Weld end | |
Port connection 1 pipe standards 1 | ASME BPE | |
Port connection 1 pipe standard 2 | DIN 11866 serie C | |
Port connection 1 size DN | DN 15 | |
Port connection 1 DN inch | 0,5 | Inch2 |
Port connection 1 inner diameter (mm) | 9,4 | mm |
Port connection 1 wall thickness (mm) | 1,65 | mm |
Port connection 1 wall thickness inch | 0,065 | Inch2 |
Port connection 1 outer diameter (mm) | 12,7 | mm |
Port connection 1 outer diameter (inch) | 1/2 inch | |
Flow | Below seat | |
Actuator size | 70 | mm |
Actuator material | PPS (Polyphenylene sulphide) | |
Control air connection material | Plastic | |
Control air connection type | Interface ELEMENT | |
Control air connection diameter (mm) | 6 | mm |
Control air connection 1 pre-mounted | not equipped | |
Control air connection 2 pre-mounted | not equipped | |
Control air connection position | in line direction | |
Control cone | Yes | |
Control cone version | linear 10 : 1 | |
Swivel plate | no | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Position indicator | without | |
Seal nipple body material | Graphite | |
Packed seal enclosed | Yes | |
Vacuum version | No | |
Additional manual actuation included | No | |
Type label customer data | USA | |
Vekt | 1,720000 | kg |
Godkjenningstype | ||
Sertifiseringstype |
Nedlastinger
Datablader
Brukerhåndbøker
EU-deklarasjon
Flyveblader og kataloger
Beskrivelse |
Filstørrelse |
Språk / land |
|
---|---|---|---|
![]() |
1,3 MB | NO | |
![]() |
large Produktoversikt Prosess og Reguleringsventiler | 3,4 MB | NO |
![]() |
Solutions for successful Cleaning in Place (CIP) | 484,9 kB | EN / EU |