Pneumatisk betjent 2/2-veis skråseteventil ELEMENT
Type 2100 / Artikkelnr. 227617
Artikkelbeskrivelse
I samsvar med Bürkert-filosofien for modulære prosessventiler og sensorikk oppfyller denne utformingen av skråseteventilen type 2100 alle praktisk relevante krav også under vanskelige bruksforhold. Lengst mulig levetid og høyest tetthetsgrad oppnås ved hjelp av den pålitelige, selvjusterende v-ringspindelpakningen. Utformingen gjør det enkelt å integrere automatiseringsenheter i alle utbyggingstrinn, fra den elektriske/optiske posisjonsindikasjonen via den pneumatiske styringen til det integrerte bussgrensesnittet og en eksplosjonsbeskyttet apparatvariant. Det høyintegrerte systemet av ventil og automatiseringsenhet utmerker seg med en kompakt utforming med glatte overflater, integrerte styreluftkanaler, beskyttelsestypene IP65/67 og høy kjemisk bestandighet.
- Handelsvare-koder
- 84818073
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
---|---|---|
Type | 2100 | |
Product sub-group | On/off valves | |
Actuator version | ELEMENT | |
Main valve operating principle | Angle seat valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 9 | bar |
Control pressure min | 5.2 | bar |
Control pressure max | 10 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 185 | °C |
Kv value (water) | 14 | m3/h |
Pressure Class (PN) | PN 25 | |
Pressure class (LB) | 150 LB | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Plastics | |
Seat seal material | PTFE (Polytetrafluorethylene) | |
Orifice | 25 | mm |
Body nominal size | 25 | mm |
Body nominal size (IN) | 1 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 1 | |
Flow | Below seat | |
Installation length | 90 | mm |
Pipe material | Stainless steel | |
Interface to actuator | metric | |
Actuator size | 50 | mm |
Actuator material | PPS (Polyphenylene sulphide) | |
Control air connection material | Plastic | |
Control air connection type | Plug-in connection (hose) | |
Control air connection diameter (mm) | 6 | mm |
Control air connection diameter (inch) | 1/4 inch | |
Control air connection 1 pre-mounted | not equipped | |
Control air connection 2 pre-mounted | Silencer 902662 | |
Control air connection position | in line direction | |
Piston seal material | FKM (Fluor rubber) | |
Control cone | No | |
Swivel plate | yes | |
Swivel plate material | Stainless steel | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Seal nipple body material | Graphite | |
Packed seal enclosed | No | |
Vacuum version | No | |
Additional manual actuation included | No | |
Vekt | 1,300000 | kg |
Godkjenningstype | ||
Sertifiseringstype |
Nedlastinger
Datablader
Brukerhåndbøker
EU-deklarasjon
Interaktiv animasjon
Flyveblader og kataloger
Beskrivelse |
Filstørrelse |
Språk / land |
|
---|---|---|---|
![]() |
For stable transport of bulk materials | 635,2 kB | EN / EU |
![]() |
Solutions for successful Cleaning in Place (CIP) | 484,9 kB | EN / EU |