3/2- eller 4/2-veis magnetventiler for pneumatikk
Type 5470 / Artikkelnr. 171220
Artikkelbeskrivelse
Ventilene av typen 5470 består av en forstyrings-vippemagnetventil av typen 6104 og en pneumatisk ventil. I huset til forstyringsventilen bøyes et anker som er montert slik at det kan vippes, på samme måte som en vippe. Det kobler ventilen. Den lille vippebevegelsen til vippen er slitasjefri, så grunnsmøring er ikke nødvendig. Type 5470 R kan leveres som 3/2- og 4/2-veis ventil. Ventilene kan settes i rekke enkeltvis ved hjelp av modulflens. De kan kneppes sammen med tilkoblingsmodulene til ventilblokker. Det finnes forskjellige varianter for arbeidstilkoblingene 2 og 4.
- Handelsvare-koder
- 84812090
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
---|---|---|
Type | 5470 | |
Product sub-group | Pneumatic valves | |
Valve function | G - normally open - inlet port 1 (P) connected with outlet port 2 (B), outlet port 4 (A) connected with exhaust port 3 (R) | |
Fluidic port connection number | 4 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | Yes | |
Valve function manual actuation type | Rotary level | |
Valve function manual actuation material | PA (Polyamide) | |
Valve function manual actuation stop | Yes | |
Valve function manual actuation screw slot | Yes | |
Pneumatic pilot valve 1 | 6106 | |
Valve piloting type | Electric | |
Return type | Pneumatic spring + mechanical spring | |
Pilot control orifice (mm) | 0,6 | mm |
Pilot control material medium-contacting | PA (Polyamide) | |
Pilot control material environment-contacting | PA (Polyamide) | |
Pilot control seal material | FKM (Fluor rubber) | |
Main valve operating principle | Globe valve | |
Main valve orifice 1 (P) (mm) | 4 | mm |
Main valve wetted material | PA (Polyamide) | |
Main valve material environment-contacting | PA (Polyamide) | |
Main valve seal material | NBR (Nitrile rubber) | |
Supply connection type | Inner thread | |
Supply connection thread type | G | |
Supply connection diameter (inch) | 1/8 inch | |
Working connection type | Flanged | |
Working connection position | opposite of supply side | |
Working connection flange pattern | NAMUR | |
Working connection material | PA (Polyamide) | |
Coil resistance | 320 | Ohm |
Coil current min. | 29 | mA |
Electrical power consumption min | 0,4 | W |
Electircal power consumption max. | 0,4 | W |
Coil wiring LED | No | |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | No | |
Coil wiring polarity protection | No | |
Coil wiring polarity recovery diode | No | |
Coil wiring polarity recovery diode redundant | No | |
Power reduction integrated | No | |
Electrical connection sort | Plug pattern form C according to DIN EN 175301-803 | |
Cable plug in delivery | not included | |
Electrical connection position | top | |
Voltage / rated voltage | 9,3 | V |
Voltage / rated voltage | 9,3 | V |
Minimum terminal voltage | R20 x Imin | |
Protection type (IP max. with suitable connector) | IP65 | |
AC voltage | No | |
DC voltage | Yes | |
Battery voltage | Yes | |
Nominal pressure min | 2 | bar |
Nominal pressure max | 8 | bar |
Temperature environment min | -10 | °C |
Temperature environment max | 55 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 50 | °C |
Switch time open max. | 60 | ms |
Switch time close max. | 50 | ms |
Add-on dimension 1 | 19 | mm |
QNn value (gas) | 300 | l/min |
Nominal operation/Duty cycle | 100 | % |
Vekt | 0,160000 | kg |
Godkjenningstype | , | |
Sertifiseringstype | , |