Bürkert
Servostyrt 2/2-veis stempel magnetventil
Type 6240 / Artikkelnr. 323477
Artikkelbeskrivelse
Ventilen 6240 er en servostyrt stempelventil. For å øke trykk- og lekkasjesikkerheten er pluggen og kjerneføringsrøret sammensveiset med hverandre. Avhengig av applikasjonen er forskjellige tetninger tilgjengelige. Husets utforming og overflatekvalitet muliggjør maksimale gjennomstrømingsverdier. Kjemisk høystabil epoksy presses på spolene. En opsjonal glideringlagring øker driftstiden ved tørre gasser. For å redusere det elektriske effektopptaket under drift er en "Kick and Drop"-elektronikk for overstimulering (plugg 2511) tilgjengelig. Sammen med en plugg i henhold til DIN EN 17301-803 form A oppfyller ventilene beskyttelsesart IP65. Ventiler i edelstålutførelse oppfyller NEMA 4X.
- Handelsvare-koder
- 84818079
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
|---|---|---|
| Type | 6240 | |
| Operation | servo-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 1 | bar |
| Nominal pressure max (gas) | 100 | bar |
| Nominal pressure max (liquid) | 100 | bar |
| PN max (oil) | 80 | bar |
| Nominal pressure (DIN EN 1333) | PN 160 | |
| Main valve orifice 1 (P) (mm) | 6 | mm |
| Main valve orifice 1 (inch) | 1/4 inch | |
| Kv value (water) | 0,75 | m3/h |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 3/8 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 3/8 | |
| Valve seat material | Stainless steel | |
| Seat seal material category | Plastics | |
| Seat seal material | PCTFE (Polychlorotrifluoroethylene) | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 120 | °C |
| Voltage / rated voltage | 230 | V |
| Voltage / rated voltage | 230 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 16 | W |
| inrush power consumption AC | 16 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00314839 - 2518 | |
| Electrical connection position | in direction of flow left | |
| Electrical connection special feature | Running only through connector socket with rectifier | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 42 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Power reduction integrated | No | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 100 | ms |
| Switch time open max. | 200 | ms |
| Switch time close min | 300 | ms |
| Switch time close max. | 500 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control seal material | PEEK (Polyetheretherketone) | |
| Low-noise version | No | |
| Core guide | Sliding ring | |
| Sliding ring material | PTFE (Polytetrafluorethylene) | |
| Main valve with integrated screen | No | |
| Installation length | 55 | mm |
| Valve construction | Valve complete | |
| Vekt | 0,9 | kg |
Kan kombineres med
Applikasjoner og verktøy
For denne aktiviteten må du være logget inn.
Vennligst logg inn for å få tilgang til CAD-modeller og CAD-nedlastinger:
Nedlastinger
Datablader
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
Type 6240 data sheet | servo-assisted piston valve | 2 MB | EN / EU |
|
|
Typ 6240 Datablad | Servostyrd 2/2-vägs kolvventil | 2 MB | SV / ZDTS |
|
|
Typ 6240 Datenblatt | servogesteuertes Kolbenventil | 2 MB | DE / DE |
Brukerhåndbøker
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
Additional manual AC10 | FM Division 1 US/CA V2.0 | 247 kB | EN / US |
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 6240 | 2/2-way servo solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Operating Instructions Type AC19 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC19 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC19 | Magnetspule | ATEX und IECExZulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC19 | Magnetspule | ATEX und IECExZulassung | v2.0 | 1 MB | DE / DE |
|
|
Driftsinstruktion Type 6240 |2/2-vägs servomagnetventil | 597 kB | SV / ZMAN |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual d'utilisation Type AC19 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC19 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de instrucciones modeloAC10 | bobina magnética | homologación ATEX y IECEx V2.0 | 1 MB | ES / ES |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Bobina magnética tipo AC10 | PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | 1 MB | PT / BR |
|
|
Manual de usuario Tipo 6240 | Válvula de émbolo de 2/2 víasservocontrolada | 1000 kB | ES / ES |
|
|
Manuel d'utilisation Type AC10 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
使用说明 6240 型 | 2 位 2通伺服电磁阀 | 2 MB | ZH / CN |
|
|
使用说明 AC19 | 型电磁线圈 | 具有 II 2G/DEx 认证的设 | v2.0 | 2 MB | ZH / CN |
|
|
取扱説明書 AC10 | 電磁コイル タイプ | 認可済み装置 ATEX IECEx V2.0 | 1 MB | JA / JP |
EU-deklarasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 72 kB | EN,FR,DE |
Interaktiv animasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
3D-Animation - 6240 | 3 MB | EN |
Flyveblader og kataloger
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |