Bürkert
Direktevirkende 2/2- eller 3/2-veis klappankerventil
Type 0330 / Artikkelnr. 20528
Artikkelbeskrivelse
Ventilen 0330 er en direktevirkende, medie-separert klappankerventil. Det fås i 3/2- og 2/2-veis-utførelse. Som 3/2-veis-versjon kan den anvendes som fordeler- eller blandeventil. Avhengig av applikasjonene er forskjellige membraner og virkemåter tilgjengelige. Standard-messinghuset oppfyller alle europeiske drikkevannskrav. Hus kommer i tillegg i syrefast (316L), PVDF og polypropylen. Kjemisk høystabil epoksy presses på magnetspolene. For å ta den i bruk og teste den er 0330 utstyrt med en håndbetjening. For å redusere energibehovet kan alle spoler leveres med en elektronisk effektredusering eller som impulsutførelse. Koblingstilstanden kan skje via en posisjonstilbakemelding som binært- eller NAMUR-signal. Sammen med en plugg i henhold til DIN EN 17301-803 form A oppfyller ventilene beskyttelsesart IP65/67 – i forbindelse med et edelstål- eller kunststoffhus NEMA 4X.
- UPC-nummer
- 887674000594
- Handelsvare-koder
- 84818079
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
|---|---|---|
| Type | 0330 | |
| Operation | direct-acting | |
| Actuator type | Pivot | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | F - distributing valve - normally inlet port 1 (P/IN) connected with outlet port 2 (B/NO), outlet port 4 (A/NC) closed | |
| Fluidic port connection number | 3 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 4 | bar |
| Main valve orifice 1 (P) (mm) | 4 | mm |
| Main valve orifice 1 (inch) | 5/32 inch | |
| Main valve orifice 3 (R) (mm) | 4 | mm |
| Kv value (water) | 0,3 | m3/h |
| QNn value (gas) | 325 | l/min |
| Main valve wetted material | PP (Polypropylene) | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/4 | |
| Port connection 3 type | Inner thread | |
| Port connection 3 thread type | G | |
| Port connection 3 thread marking | 1/4 | |
| Valve seat material | PP (Polypropylene) | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Seat seal material Shore hardness | 70 | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 80 | °C |
| Temperature surface max | 155 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | Yes | |
| Rated power DC | 11 | W |
| Reduced power DC | 11 | W |
| Rated power consumption | 8 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00314802 - 2518 | |
| Electrical connection position | top | |
| Electrical connection polarity | Irrelevant | |
| Electrical connection material | Brass | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 40 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 10 | ms |
| Switch time close max. | 20 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Installation length | 56 | mm |
| Mounting type | Plastic-cutting screws | |
| Valve construction | Valve complete | |
| Vekt | 0,325 | kg |
Kan kombineres med
Applikasjoner og verktøy
For this activity you have to be logged in.
Please log in to access CAD models and CAD downloads:
Nedlastinger
Datablader
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
Type 0330 data sheet | pivoted armature valve | 1 MB | EN / EU |
|
|
Typ 0330 Datenblatt | Klappanker-Magnetventil | 1 MB | DE / DE |
|
|
Type 0330 Fiche technique |Électrovanne à armature battan2/2 ou 3/2 voies à action dire | 1 MB | FR / FR |
Brukerhåndbøker
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
Additional manual 0330 | FM Division 1 US/CA V2.0 | 206 kB | EN / US |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 012X 0330 033X | 2/2-way and 3/2-way solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type 0330 0331 | 2/2-way or 3/2-way solenoid valves, direct-acting | 571 kB | EN / EU |
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manual d'utilisation Type ACP016 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Manual de instrucciones Modelo 0121, 0330, 0331 | Electroválvula de 2/2 o 3/2 ví | 954 kB | ES / ES |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
EU-deklarasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 43 kB | EN,FR,DE |
Interaktiv animasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
3D-Animation - 0330 | 1 MB | EN |
Flyveblader og kataloger
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
Brochure contains the following types: 0121 0124 0330 0331 0780 0788 0789 | 1 MB | NO |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |