Bürkert
Klappankerventil 2/2-veis eller 3/2-veis direktevirkende
Type 0330 / Artikkelnr. 18361
Artikkelbeskrivelse
Ventilen 0330 er en direktevirkende, medieseparert klappankerventil. Den fås i 3/2- og 2/2-veis-utførelse. Som 3/2-veis-versjon kan den brukes som fordeler- eller blandeventil. Avhengig av applikasjonene står forskjellige membranmaterialer og virkemåter til disposisjon. Standard-messinghuset oppfyller alle europeiske drikkevannskrav. Utvalget av hus kompletteres av varianter i rustfritt stål (316L), PVDF og polypropylen. Magnetspolene innkapsles med en kjemisk svært motstandsdyktig epoksy. Siden spolesystemet er separert fra mediet med en membran, er ventilen spesielt egnet for kritiske medier som aggressive syrer og baser. For idriftsettingen og kontroll er 0330 utstyrt med en manuell betjening. For å redusere energibehovet kan alle spoler leveres med en elektronisk effektreduksjon eller som impulsutførelse. Koblingstilstanden kan skje via en stillingstilbakemelding som binær- eller NAMUR-signal. I forbindelse med en plugg i henhold til DIN EN 175301-803 Form A oppfyller ventilene beskyttelsesklasse IP65/67 – i forbindelse med et hus i rustfritt stål eller plast NEMA 4X.
- Handelsvare-koder
- 84818079
- Land
- DE
Tekniske egenskaper
Navn |
Verdi |
Enhet |
|---|---|---|
| Type | 0330 | |
| Operation | direct-acting | |
| Actuator type | Pivot | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | D - normally open - inlet port 1 (P/NO) connected with outlet port 2 (B/OUT), exhaust port 3 (R/NC) closed | |
| Fluidic port connection number | 3 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Flow | Below seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 16 | bar |
| Main valve orifice 1 (P) (mm) | 2 | mm |
| Main valve orifice 1 (inch) | 5/64 inch | |
| Main valve orifice 3 (R) (mm) | 2 | mm |
| Kv value (water) | 0,11 | m3/h |
| QNn value (gas) | 120 | l/min |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/4 | |
| Port connection 3 type | Inner thread | |
| Port connection 3 thread type | G | |
| Port connection 3 thread marking | 1/4 | |
| Valve seat material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | NBR (Nitrile rubber) | |
| Seat seal material Shore hardness | 70 | |
| Sealing toward outside material | NBR (Nitrile rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 80 | °C |
| Temperature surface max | 150 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 30 | V·A |
| Rated power AC | 15 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00314802 - 2518 | |
| Electrical connection position | top | |
| Electrical connection polarity | Irrelevant | |
| Electrical connection material | Brass | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 8 | ms |
| Switch time open max. | 15 | ms |
| Switch time close min | 8 | ms |
| Switch time close max. | 15 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Installation length | 46 | mm |
| Mounting type | Metric screws | |
| Valve construction | Valve complete | |
| Vekt | 0,46 | kg |
Kan kombineres med
Applikasjoner og verktøy
Nedlastinger
Datablader
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
Type 0330 data sheet | pivoted armature valve | 1 MB | EN / EU |
|
|
Typ 0330 Datenblatt | Klappanker-Magnetventil | 1 MB | DE / DE |
|
|
Type 0330 Fiche technique |Électrovanne à armature battan2/2 ou 3/2 voies à action dire | 1 MB | FR / FR |
Brukerhåndbøker
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
Additional manual 0330 | FM Division 1 US/CA V2.0 | 265 kB | EN / US |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 012X 0330 033X | 2/2-way and 3/2-way solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type 0330 0331 | 2/2-way or 3/2-way solenoid valves, direct-acting | 571 kB | EN / EU |
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manual d'utilisation Type ACP016 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Manual de instrucciones Modelo 0121, 0330, 0331 | Electroválvula de 2/2 o 3/2 ví | 954 kB | ES / ES |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
|
|
使用说明 ACP016 | 型电磁线圈 | 具有 II 2G/D Ex 认证的设 | v2.0 | 2 MB | ZH / CN |
EU-deklarasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 43 kB | EN,FR,DE |
Interaktiv animasjon
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
3D-Animation - 0330 | 1 MB | EN |
Flyveblader og kataloger
Beskrivelse |
Filstørrelse |
Språk / land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
Brochure contains the following types: 0121 0124 0330 0331 0780 0788 0789 | 1 MB | NO |
|
|
723 kB | AF | |
|
|
For safe and reliable analysis in In-Vitro Diagnostics | 838 kB | EN / EU |
|
|
Media separation ensures continous and safe processes | 599 kB | EN / EU |
|
|
Selection Disc | 641 kB | EN / US |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |