Bürkert - nært deg
Kontor /1
    • Hovedkontor
      Burkert Norway AS
      Hvamstubben 17
      2013 Skjetten
      Telefon +47 63 84 44 10
      Faks +47 63 84 44 55
      Epost vasb@ohexreg.ab
      Website http://www.burkert.no/
  • Hovedkontor
  • Hovedkvarter
  • Systemhaus
  • Forhandler
  • Kontor
  • Anlegg
  • Logistikksenster
bürkert
 
    Det er en nyere versjon tilgjengelig for denne artikkelen. Finn detaljer her

    This article number 00283 is only available for a limited time.

    Defined wearing parts kits might still be available.

    Please contact us regarding a successor product.

    Servostyrt 2/2-veis stempelventil

    Type 2400 / Artikkelnr. 283

    Produkt-Foto Typ 2400

    Avbilding av produkt kan variere fra den aktuelle sammensetningen.

    • Produkt-Foto Typ 2400
    • 9000131292.jpeg
    • 9000219076.jpeg
    • 9000219087.jpeg
    • 9000099170.jpeg

    2/2-veis magnetventil 1-160bar

    • Overskjøvet spolesystem
    • Høytemperaturversjon, opptil 250 bar, opptil DN 12
    • Hus i rustfritt stål

    For å velge korrekt produkt, vennligst se tekniske data, bilder og notater, for korrekt bruk i henhold til databladet.

    Artikkelbeskrivelse

    Den forstyrte ventilen type 2400 har et servostempel med 2-veis forstyring. Den er beregnet på høye trykk. Det spesielle med dette ventilkonseptet er utformingen av setet og tetningselementet. En ekstra radial tetning gir svært god tetthet. Det kjegleformede tetningselementet til forstyringen gjør det mulig å regulere høye trykk ved relativt lav spoleeffekt.


    Handelsvare-koder
    84818079
    Land
    DE

    Tekniske egenskaper

    Navn
    Verdi
    Enhet
    Type 2400
    Operation servo-controlled
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation No
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 1 bar
    Nominal pressure max (gas) 160 bar
    Nominal pressure max (liquid) 160 bar
    Main valve orifice 1 (P) (mm) 12 mm
    Main valve orifice 1 (inch) 7/16 inch
    Kv value (water) 2.6 m3/h
    QNn value (gas) 2800 l/min
    Main valve wetted material Brass
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1/2
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1/2
    Valve seat material Stainless steel
    Medium-contacting part core material Stainless steel
    Medium-contacting part stopper material Stainless steel
    Seat seal material category Plastics
    Seat seal material PTFE (Polytetrafluorethylene)
    Sealing toward outside material NBR (Nitrile rubber)
    Temperature environment max 55 °C
    Temperature medium min -10 °C
    Temperature medium max 80 °C
    Voltage / rated voltage 230 V
    Voltage / rated voltage 230 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    Voltage frequency 50 Hz
    AC voltage Yes
    DC voltage No
    Battery voltage No
    Rated power consumption 20 W
    inrush power consumption AC 85 V·A
    Rated power AC 48 V·A
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) 65
    Coil type placed on top
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 200 ms
    Switch time close min 300 ms
    Switch time close max. 500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oxygen version No
    Oil burner valve No
    Steam version No
    Pilot control orifice (mm) 1.2 mm
    Pilot control seal material PCTFE (Polychlortrifluorethylene)
    Low-noise version No
    Main valve with integrated screen No
    Installation length 75 mm
    Without mounting No
    Valve construction Valve complete
    Vekt 2,020000 kg
    Vis full tabell Legg sammen tabell

    Nedlastinger

    Datablader

    Beskrivelse
    Filstørrelse
    Språk / land
    DTS Type 2400 data sheet | servo-assisted piston valve 247,6 kB EN / EU
    DTS Type 2400 data sheet | servo-assisted piston valve [US units] 247,3 kB EN / US
    DTS Typ 2400 Datenblatt | servogesteuertes Kolbenventil 249,4 kB DE / DE
    DTS Type 2400 fiche technique | Électrovanne assistée à piston pour hautes pressions 357,3 kB FR / FR

    Brukerhåndbøker

    Beskrivelse
    Filstørrelse
    Språk / land
    MAN Additional manual Type 0721 | Type X, IIC 2G Ex mb or IIC 2G Ex e mb ATEX-approval 584 kB EN / EU
    MAN Operating Instructions Type 2400 | 2/2-way solenoid-operated valve 310,6 kB ,EN,FR,DE,IT,ES / EU
    MAN Bedienungsanleitung Typ 2400 | 2/2-Wege-Magnetventil, DN5 /DN8 655,4 kB DE / DE
    MAN Manuel supplémentaire Type 0407 | Type X, IIC 2G Ex mb, IIC2G Ex e mb homologation ATEX 587,4 kB DE / FR
    MAN Zusatzanleitung Typ 0721 | Type X, IIC 2G Ex mb bzw. IIC 2GEx e mb ATEX-Zulassung 571,2 kB DE / DE

    EU-deklarasjon

    Beskrivelse
    Filstørrelse
    Språk / land
    ABD EU-DoC|EU Declaration 1,7 MB EN,FR,DE

    Min sammenligningsliste